If the Glambot® Motion Control Webapp is disconnecting and reconnecting, there are a few most common fixes:
Turn Wi-Fi assist OFF on your control device. This can be found in the cellular settings of your iPad or iPhone.
Change the Wi-Fi IP Configuration to manual
Go to the Wi-Fi settings on the iPad and tap the blue "i" logo next to the Glambot network
Scroll down to IPV4 Address, then tap and hold on the IP Address and click copy
Click [Configure IP] and select [Manual]
Paste the IP Address
Enter 255.255.255.0 for the Subnet Mask
Leave Router empty
Click [Save] in the top right corner
You will now see a spinning wheel when connecting to the Glambot Wi-Fi signal. This is normal and will still allow for control of the Glambot locally on the network. You should see the cellular connection in the top right corner of the iPad, which will allow the internet connection and Snappic videos to upload.
Turn cellular data OFF
Connect your ipad to the Glambot® using Ethernet. Follow THIS GUIDE for how to do this.