Pairing Glambot® with LumaBooth
Connect the device running LumaBooth to the Glambot Bluetooth
Open the LumaBooth app and launch event
Open the event settings menu by tapping the dropdown arrow in the top-right corner
Select [capture mode] and make sure that [Boomerang/360] is selected
Go to [capture settings] and set the countdown to 1 sec. (adjust if needed)
Configure recording time and effects as desired
Navigate to camera settings and adjust as desired
For iPhone, set the camera to [Back Wide Angle]
Set video stabilization to [High]
Zoom should be at [1.0]
When using DSLR in portrait orientation, adjust the camera rotation setting to portrait 270 degrees or portrait 90 degrees depending on which direction your camera is oriented.
Tap the dropdown arrow in the top right, then [Launch Event]
Your Glambot is now ready!
When ready to begin filming, select your desired path and then press the green [Start] button on the Glambot Motion Control Software. The iPhone/Camera should automatically begin recording after the countown when the Glambot path begins.
If the video does not automatically begin recording, go back to step 1 and verify that you have connected the iPhone running Lumabooth to the Glambot Bluetooth signal.