Latest Version: 3.17.X

Main Controls:

Home: Moves to a collapsed position for stowing while the unit is powered.
Off | Extended: Moves to a horizontal position used for powering off & assembling.
Camera Wake: Manually sends Bluetooth trigger to control device.
When Path Completes: Determines if the path selection is maintained or clears after execution.
Speed: Slider to select the overall speed of the robotic arm during a movement.
Path: Controls the movement that will be executed to capture a video.
Sweeps: Paths that main movement is side-to-side.
Pushes: Paths that start away from the subject and move towards the target.
Pulls: Paths that start close to the subject and move away from the target.
Presets: Unique saved path combinations.
- To create a custom preset, select the desired paths, then tap and hold one of the preset slots to rename, then tap [OK]
Timeline: Displays the order and duration and of the selected paths.
Total: The total time duration of the selected paths.
Ready Position: Moves to the starting point of the selected path.
Start: Initiates movement after a path is selected.
Stop: Halts the robot during a given movement using software only.

Target Height: Adjusts the focal height of the camera during the path.
Countdown Delay: Time that the robot remains at the start position prior to executing a path.
Recording Trigger: Selects the timing to trigger the recording device.
- [0] is the default, recommended for a wired DSLR camera connection.
- [+0.25] is recommended for a wired GoPro connection.
- [+0.5] is recommended for a wireless GoPro connection.
- Note that cameras and cables can vary in the exact timing and synchronization with the robot. Adjust as needed and use whichever setting triggers the recording closest to the beginning of the robot movement for your specific setup.
Errors & Logs: Shows error messages for troubleshooting.
Save Logs: Downloads logs to the device for sharing with Glambot® technicians.
Legend: Defines the abbreviations for the path directions + height at start and stop.
Preferences:
- Show Timeline: Displays or hides the timeline
- Auto Calibrate on Power On: When enabled, the robot will begin moving without any input from the operator upon powering on. By using this feature, you understand and accepts the risks associated.

Home: Moves to a collapsed position for stowing while the unit is powered.
Off | Extended: Moves to a horizontal position used for powering off & assembling.
Camera Wake: Sends Bluetooth trigger to control device.
Path Selection: Determines if the path selection is maintained or clears after execution.
Speed: Slider to select the overall speed of the robotic arm during a movement.
Path: Controls the movement that will be executed to capture a video.
Sweeps: Paths that main movement is side-to-side.
Pushes: Paths that start away from the subject and move towards the target.
Pulls: Paths that start close to the subject and move away from the target.
Time: The total duration of the selected paths.
Start: Initiates movement after a path is selected.
Stop: Halts the robot during a given movement using software only.

Target Height: Adjusts the focal height of the camera during the path.
Path Start Delay: Time that the robot remains at the start position prior to executing a path.
Connection Type: Selects the method of connection to the recording device. Typically, USB is used for a wired connection and Bluetooth for wireless. However, note that cameras and cables can vary in the exact timing and synchronization with the robot. We recommend testing both connection types and using whichever one triggers the recording closest to the beginning of the robot movement.
Error Log: Shows error messages for troubleshooting.
Legend: Defines the abbreviations for the path directions + height at start and stop.